Showsight July 2020

Cane Corso CANE CORSO ASSOCIATION OF AMERICA BREED EDUCATION T he lack of consistency continues to be a major problem in the Cane Corso. We believe the lack of

CORRECT MUZZLE LENGTH: IT’S NOT WHAT YOU THINK! The standard calls for a 1:3 ratio, yes. But this measurement is often misinter- preted as the “Midpoint.” That is incorrect. The 1:3 is a boundary measurement put in place to guard against excessively short muzzles. If the muzzle is shorter than 1:3, it changes expression, causes the convergence to be extreme, and is associated with excessive undershot, round/bulging eyes, and pinched nares. In a nutshell, a muzzle that is too short fundamentally changes the head type; and this head type, however popular or common, is not correct. This concept is clear when we review our breed history. During the recovery, many examples of Corso farm dogs were measured and cataloged. As a result, a dog named Basir was determined to have the ideal muzzle. His muzzle measured 38% of his overall head length. That is 5% longer than the boundary in the standard. So, as you evaluate muzzle length, remember history; 33 to nearly 40% is correct Corso type. Anything shorter will typically lack correct breed head type. ANTERIOR FACE OF THE MUZZLE IS FLAT: NOTHING SHOULD BE STICKING OUT! There is always a lot of talk about which bite is correct for the Corso. Almost always a muzzle with the correct front will always accompany a functional bite. Here’s the trick; when viewed from the side, the line from the nose down to the chin is per- pendicular. The definition is critical here. Perpendicular lines are defined as two lines that meet or intersect each other at right angles (90°). So, the nose appears as the top “corner” for front of the muzzle and the horizontal line of the bridge of the muzzle. The chin is the bottom “corner” for the muzzle front and the horizontal jawline. The nose should not stick out over the chin and the chin should not jut out beyond the point of the nose; neither is prominent. SLIGHT CONVERGENCE: NO DOME FOREHEADS OR SKI SLOPES, PLEASE. education and the misunderstanding of breed traits is a significate factor. Therefore, the Breed Educa- tion department of the CCAA has put together some points that may help judges and the fancy sort out problems areas. 1 2 3 The parameters defining the space between the stop and occiput (little bump at the back of the skull between the ears) may be one of the breed’s most misunderstood. Over the years, and with the shortening of the muzzle, we have seen a radical change in the shape and incline of the forehead. A change that has made correct convergence uncommon. We must retrain our eyes. When viewed from the side, the skull gradu- ally flows back from the pronounced brow and slightly inclines toward the back skull. The forehead does not ascend directly up from the brow. The forehead’s side profile should not bulge or be rounded, like a football helmet. If the slope of the forehead is steep and is at an angle suitable for skiing, this is a clear sign of outside breed influ- ence. *Note: no convergence will exhibit parallel planes, which is also unacceptable. >


Powered by