Black and Tan Coonhound Breed Magazine - Showsight

COONHOUND STRUCTURE: FORM EQUALS FUNCTION

The same is true about the hindquarters. The dog in this photo (below right) shows the relationship between the length of the two bones and the angle formed by them. We can’t see through to the bone, but look at the width of the thigh. I’ve never seen a coon- hound that had too much width of second thigh. In coonhounds, we’re also losing some angle from the stifle joint to the point of the hock. We’re getting too many dogs that look unbalanced, especially if they’re straight in the shoulder and straight in the hindquarter assembly. Look for second thigh, width of thigh. You have to observe this with your eyes and your hands to make sure they are correct. And remember that the tail is an extension of the spine. A tail that goes straight up may affect the pitch of the pelvis. Up front, you can really see and feel the shoulder blades. Again, balance is the key . If you see this in action, you’ll know what I’m talking about. You’ll say, “Now I get it. That is side gait.” That’s something we don’t look for enough when we judge. A dog can look pretty standing there with a handler posing them, but when you gait them on the ground there is nothing that can be done to make them look good. You can’t do it with the lead. What you see is what you get. And don’t let markings fool you—easy to do with a Treeing Walker’s markings especially. As a result, his shoulders might look different, but when you get your hands on him you will see where his shoulder blades are. Don’t be afraid to get your hands on those blades, to feel them. If you run your hands down the blades, and down the upper arms to the elbows, you can visualize what the angles are. The feet and pasterns are very closely tied together and they should be in balance with each other. You’ll hardly ever see great pasterns with bad feet, or the other way around. It’s usually a pack- age. We get to the point in coonhound shows that we’re looking for such tight feet that we might be getting a little carried away some- times. A great cat foot with a straight pastern is pretty to look at, but it doesn’t offer any shock absorbers to the force coming down through the shoulders. You’ve got to have a little spring, a little flex- ibility, to the slightly sloping pastern. Coonhounds are a scenthound and the tail carriage will be up. You want to see a dog that can extend its front, that can push behind, show balance, propulsion and locomotion movement with ease, and cover ground. Withers-back-loin-croup is all you need to remember. Four basic parts that better work together. If the withers are too steep, the shoulders aren’t laidback enough; there’s going to be a basic, functional problem. If the back’s too long or too short, there’s going to be a basic, functional problem. If the ribs don’t go back into the loin far enough, or deep enough, there’s going to be a basic, functional problem. Other problems to be aware of include a weak loin and a roach back. The croup’s got to have some pitch and some length. If a croup is too short and steep, it will affect the tail set. I hope that this will help in the judging of our coonhounds. They are a movement dog with good reach and drive. Coonhounds give meaning to Form=Function. “You want to see a dog that can extend its front, that can push behind, show balance, propulsion and locomotion movement with ease, and cover ground.”

left: Puppy—Good muscling, right: Older dog—Good muscling

left: Adult male—Good Inner and Outer Thigh, Great Muscling, center: Too Straight, right: Excellent Rear Angles

Figure 1.

Figure 2. Dog 1. Correct Hind Angulation: Note the 30-degree slope of the pelvis. This provides the most power. Just as important is the perfect 130-degree angle of the back joint, providing the leverage to push the dog forward. Dog 2. Incorrect Hind Angulation. The pelvic slope of 10 degrees promotes the overly-straight stifle joint shown here. The back joint is also overly- straight at 148 degrees.

Movement

SHOWSIGHT MAGAZINE, OCTOBER 2021 | 227

Powered by